Flying-Hobby
DJI S800 ESC (GREEN LED)
| TECHNICAL SPECS | Current |
| Voltage | 6S LiPo |
| Signal Frequency | 30Hz ~ 450Hz |
| Drive PWM Frequency | 24KHz |
| Weight | 18g |
Flying-Hobby
KDE DIRECT ALIGN TREX 600 PRO FLYBARLESS UPGRADE KIT
:, AT600P-FMB x 2 , AT600P-MBB, AT550/600-MRHFB, AT600P-RFMB, AT600P-UMM),
Includes - One (1) TREX 550/600 Series Aluminum Flybarless Main ...Flying-Hobby
T-REX 500PRO DFC SUPER COMBO (DFC VERSION) + APS GPS SYSTEM (FREE EXPRESS SHIPPING)
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ● Length | 868mm |
| ● Height | 275mm |
| ● Main Blade Length | 425mm |
| ● Main Rotor Diameter | 978mm |
| ● Tail Rotor Diameter | 206mm |
| ● Motor Drive Gear | 12T |
| ● Main Drive Gear | 134T |
| ● Autorotation Tail Drive Gear | 145T |
| ● Tail Drive Gear | 36T |
| ● Weight(With Motor) | 1210g |
Remark :, All T-REX 500 DFC Combo have change to this canopy -, Combo Included :, ●T-REX 500PRO DFC Kits Set X1, 3GX Programmable Flybarless System :, , Specification(3GX Programmable Flybarless System) :, T-REX 500 PRO DFC:, ●Features, Specification(T-REX 500 PRO DFC) :, ● Drive Gear Ratio: 1:11.17:4.03, Radio transmitter and electronic equipment required for assembly:, ●Transmitter(7-channel or more, helicopter system),
Free Express Shipping HC5112 ●3GX Flybarless System X1 set ●425 ...Flying-Hobby
DJI PHANTOM LANDING GEAR
,
DJI Phantom Replacement Landing Gear (Pair) Replacement landing gear pair ...Flying-Hobby
BMR-6CH-72MHZ (JR)RECEIVER
| Current Drain | 48 mA +/- 550 mA |
| Operating Voltage | 3.6~7.2V |
| Modulation | FM(PPM) |
| Sensitivity | 5uV |
| Range(on Ground) | 250m / 800’ ft |
| Size(W x L x H)? | 20.3 x 30.5 x 9.8 mm |
| Ant length | 100cm / 40” in |
| Weight Vertical | 8.6g |
Flying-Hobby
T-REX 450PRO DFC (WITH 3GX) + FREE EXPRESS COMBO
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| Instructions | (T-REX 450PRO DFC) |
| Specification | (T-REX 450PRO DFC) |
| ●Length | 640mm |
| ●Height | 204mm |
| ●Main Rotor Diameter | 710mm |
| ●Tail Rotor Diameter | 158mm |
| ●Motor Drive Gear | 12T |
| ●Main Drive Gear | 121T |
| ●Autorotation Tail Drive Gear | 106T |
| ●Tail Drive Gear | 25T |
| ●Weight(w/o power system) | 513g |
| ●Flying Weight | Approx. 638g |
Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., Specification(3GX Programmable Flybarless System) :, Features:, ● Equipped with DFC flybarless head assembly, with extremely low CG design to minimize wind resistance, providing more direct and precise flight control response and higher top speed., ●Drive Gear Ratio: 1:10.08:4.24, Accessories:, ●T-REX 450 PRO DFC Kit X 1 set, Radio transmitter and electronic equipment required for assembly:, 1.Transmitter(6-channel or more,helicopter system),
Free Express Shipping ●3GX is currently the smallest and lightest ...Flying-Hobby
TREX 600 E CANOPY MOUNTING SET (SLIVER)
Product Detail :, High security alloy canopy mounting set for the Trex 600,
ELECTRIC Canopy mounting pylons with alloy thumb screw retainers, replacement ...Flying-Hobby
T-REX 600E PRO DFC JR XG8 2.4G RTF COMBO
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ● Length | 1174mm |
| ● Height | 319mm |
| ● Width | 210mm |
| ● Main Blade Length | 600mm |
| ● Main Rotor Diameter | 1347mm |
| ● Tail Rotor Diameter | 260mm |
| ● Motor Drive Gear | 13T |
| ● Main Drive Gear | 112T |
| ● Autorotation Tail Drive Gear | 131T |
| ● Tail Drive Gear | 34T |
| ● Weight(With Motor) | 2290g |
Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., Specification(3GX Programmable Flybarless System) :, Specification(T-REX 600E PRO DFC) :, ●Features, Specification(T-REX 600E PRO DFC) :, ● Drive Gear Ratio: 1:8.61:3.85, Accessories:, ●T-REX 600E PRO DFC Kits Set X1, Radio transmitter and electronic equipment required for assembly:, ●Transmitter(7-channel or more, helicopter system),
T-REX 600E PRO DFC 1 Castle ICE2 HV 80 Brushless ...Flying-Hobby
SPARTAN QUARK GYRO W (DARK GOLD METAL CASE)
| • Dimensions | 20.6 x 20.6 x 9.6mm (0.81 x 0.81 x 0.36 inch) |
| • Weight | Plastic case 8.2 grams, Alloy case 10.2 grams (inc. cables) |
| • Sensor Type | MEMS |
| • Control system | Proprietary PID with adaptive tuning |
| • Supported servos | 760us, 960us and 1520us centre pulse |
| • Standard setup | Servo type, reversing and dual endpoint adjustment |
| • Operating voltage | 3.8V to 8.4V |
| • Current draw | <75mA |
Spartan Quark Key Features:, • Market leading tail hold and pirouette consistency, Spartan Quark Box Contents:, • Spartan Quark gyro, Spartan Quark Specifications:,
Spartan Quark - MEMS AVCS Gyro Whether you are an ...Flying-Hobby
T-REX 700E DFC SUPER COMBO
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ● Length | 1345mm |
| ● Height | 360mm |
| ● Width | 208mm |
| ● Main Blade Length | 690mm |
| ● Main Rotor Diameter | 1562mm |
| ● Tail Rotor Diameter | 281mm |
| ● Motor Drive Gear | 12T |
| ● Main Drive Gear | 112T |
| ● Autorotation Tail Drive Gear | 104T |
| ● Tail Drive Gear | 22T |
| ● Weight(With Motor) | 2900g |
Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., Specification(3GX Programmable Flybarless System) :, Specification(T-REX 700E DFC) :, ● Drive Gear Ratio: 1:9.33:4.37, Specification(T-REX 700E DFC) :, , Features:, 1. Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, providing the most direct and precise control feel back to the pilot, and exhibits exhilarating 3D performance and unimaginable flight speed., Accessories:, ●T-REX 700E DFC Kits Set x 1set, Radio transmitter and electronic equipment required for assembly:, ●Transmitter(7-channel or more, helicopter system),
●3GX is currently the smallest and lightest flybarless system on ...Flying-Hobby
SPARTAN RC QUARK MEMS AVCS HEADING HOLD GYRO (CLEAR)
| Sensor Type | MEMS |
| Operating voltage | 3.8V to 8.4V |
| Current draw | <75mA |
Features:, , Box contents:, , Specifications:, Dimensions:, 20.6 x 20.6 x 9.6mm (0.81 x 0.81 x 0.36 inch), Weight:, Plastic case 8.2 grams, Alloy case 10.2 grams (inc. cables), Control system:, Proprietary PID with adaptive tuning, Supported servos:, 760us, 960us and 1520us centre pulse, Standard setup:, Servo type, reversing and dual endpoint adjustment,
This is the Spartan Quark - MEMS AVCS Gyro with ...Flying-Hobby
TREX 600 E CANOPY MOUNTING SET (BLACK)
Product Detail :, High security alloy canopy mounting set for the Trex 600,
ELECTRIC Canopy mounting pylons with alloy thumb screw retainers, replacement ...Flying-Hobby
CARBON LANDING GEAR-MCPX
| 1) Fiberglass | lightweight, extremely strong, and robust material, not liable to warp or corrode, heat-resisting, |
| 2) Carbon fiber | Extremely lightweight and strong , good surface. |
Flying-Hobby
T-REX 100X SUPER COMBO
| Specification | ●Length |
| ●Height | 82mm |
| ●Main Rotor Diameter | 192mm |
| ●Tail Rotor Diameter | 36mm |
| ●Weight(w/o power system) | 28.8g |
| ●Flying Weight | Approx 33g |
Introduction:, ●Fun and easy flying characteristic has been the reason for T-Rex 100S’s unparallel popularity. To increase its performance even further, Aligh has improved upon the T-Rex 100S and introduces the brand new T-Rex 100X., Features:, ●Brand new rotor head to main shaft attachment design, improving flight stability and minimize vibration., Accessories:, ● T-REX 100X Kits set x 1,
●To improve the flight stability and shorter learning curve, rotor ...Flying-Hobby
T-REX 600E PRO DFC COMBO
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ● Length | 1174mm |
| ● Height | 319mm |
| ● Width | 210mm |
| ● Main Blade Length | 600mm |
| ● Main Rotor Diameter | 1347mm |
| ● Tail Rotor Diameter | 260mm |
| ● Motor Drive Gear | 13T |
| ● Main Drive Gear | 112T |
| ● Autorotation Tail Drive Gear | 131T |
| ● Tail Drive Gear | 34T |
| ● Weight(With Motor) | 2290g |
Instruction(3GX Programmable Flybarless System) :, , Specification(3GX Programmable Flybarless System) :, , Specification(T-REX 600E PRO DFC) :, , Specification(T-REX 600E PRO DFC) :, , ● Drive Gear Ratio: 1:8.61:3.85, Accessories:, , Radio transmitter and electronic equipment required for assembly:, ●Transmitter(7-channel or more, helicopter system),
T-REX 600E PRO DFC Kit 1 Castle ICE2 HV 80 ...